WSLY Series Enhancement type oxygen detector zirconia oxygen analyzer is suitable continuous monitor of oxygen content in gas of industrial furnaces and ovensfor in steel mill. The Oxygen measurements that industry-leading sensor precision.
- Easy Operation Easy to operate by functional key.
- Easily replaceable zirconia element.
- IP66 or IP67 enclosure.
- High safety level
- Fast response
- The zirconia sensorcan withstand the pressure of ±8KPa.
- Adopt high temperature metal gauze filter, which has the advantages of high penetrating rate, good heat conductivity and it is very easy to clean.
- The converter cuts off the power supply for the detector when detecting a burnout of thermocouple.
(Note: Detector length is from the detector tip to flange）
1, Zirconia Detector：
Detector material: SUS316L (Customizable)
Thrusting structure: Zirconia sensor, thermocouple and electric stove wire can be removed and replaced on site.
Flue gas temperature: 0-600℃, 0-900℃, 0-1400℃
(Choose different fittings and sampling devices according to the different temperature range)
Flue gas pressure: -10KPa ~ +10KPa
Sensor: Zirconia type
Installation: DN80 flange mounting (Customizable)
Response time (T90): ≤5S
Heating time: ≤20min
Accuracy:±1% of full range
Detector protection level: IP65
Measurement range: 0 ~ 20.6 vol% (0 ~ 30% can be set)
Display: 128*32 LCD or 4 bit LED display
Operation: Menu button operation
Calibration operation: Unique 3 parameters on-line calibration
Power supply: 220±10%VAC or 90VAC~240VAC
Instrument Power: Approx. 10W (Excluding heating power)
Heating power: Average 50W (maximum 150W is available)
Temperature control accuracy: 700±1℃ (Floating temperature calculation)
Environmental conditions: Ambient temperature -20 to 70℃, relative humidity≤90%
Output signal: 4 ~ 20mA DC (Maximum load 750Ω)
Digital communications: RS232/RS485/Ethernet (cloud communications, mobile communications optional)
Protection level: IP65
Electrical interface: M20